Stats

  • Locked Locked
  • Replies 3
  • Subscribers 125
  • Views 15777
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

failed to generate netlist of nport model in adexl

Karev11

Hi Andrew,

My test bench has nport model which points to a s-parameter file. I have no problem running sims in ADEL. however, when I tried to run it in ADEXL, I kept getting netlist error messages as below, basically it complains about every terminal in the nport model being "unbound".  "check-and-save" as it suggested didn't help, restart cadence didn't help.

Do you happen to know what could cause that?

thanks,

Kev

\o Begin Incremental Netlisting Mar 17 03:20:36 2016
\o ERROR (OSSHNL-903): Failed to generate a netlist because terminal 'm3' of instance 'I3' in cellview
\o '     zz/zz_test_tb/schematic' is unbound. Do Check and Save for a schematic cellview, and for
\o other views, check and fix the design before trying to generate the netlist

\o ERROR (OSSHNL-903): Failed to generate a netlist because terminal 'p3' of instance 'I3' in cellview
\o 'zz/zz_test_tb/schematic' is unbound. Do Check and Save for a schematic cellview, and for
\o other views, check and fix the design before trying to generate the netlist

............

Parents
  • Karev11

    Thanks Andrew,  I'll try that through our CAD team.

    Another question, is there a way in ADEL to export output values to a file? I tried to at Output section and expression editor  section (in calculator), they allow you to export the expressions of output to a file but not the output values.

    I know it's very easy to do at ADEXL.


    Sorry this may sound a change of subject, but i was just trying get data out to a file from a testbench that has nport model..

Reply
  • Karev11

    Thanks Andrew,  I'll try that through our CAD team.

    Another question, is there a way in ADEL to export output values to a file? I tried to at Output section and expression editor  section (in calculator), they allow you to export the expressions of output to a file but not the output values.

    I know it's very easy to do at ADEXL.


    Sorry this may sound a change of subject, but i was just trying get data out to a file from a testbench that has nport model..

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.