Stats

  • Locked Locked
  • Replies 2
  • Subscribers 125
  • Views 13280
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

hbnoise

curt444
How can the amount of output data stored be reduced/limited? Have tried options "lvl" and "lvlpub" with 0 and 1 settings and there is no change from the default.
Parents
  • Andrew Beckett

    Do you by any chance have the Noise Separation option turned on? If so, that assumes that since the goal is to find out more about the noise contributions, you want to actually save all the noise contributions and ignores the save=lvlpub nestlvl=0 setting.

    With that turned off, I was able to set save=lvlpub nestlvl=0 either globally (on the Save All form) or on the analysis options - both worked. 

    Regards,

    Andrew

Reply
  • Andrew Beckett

    Do you by any chance have the Noise Separation option turned on? If so, that assumes that since the goal is to find out more about the noise contributions, you want to actually save all the noise contributions and ignores the save=lvlpub nestlvl=0 setting.

    With that turned off, I was able to set save=lvlpub nestlvl=0 either globally (on the Save All form) or on the analysis options - both worked. 

    Regards,

    Andrew

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.