Stats

  • Locked Locked
  • Replies 3
  • Subscribers 125
  • Views 15135
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ADE simulation setup toolbar missing buttons

wgtkan

Hello:

I am using Virtuoso Custom IC Design Environment Version IC6.1.7-64b.500.12

ADE L or XL ADE simulation setup toolbar is missing buttons. Mine just looks as follows:

How could I restore them to the default version.

The default simulation setup toolbar buttons should look like this.

I read in the ADE user manual but no luck.

Thanks a lot for your help.

Parents
  • Andrew Beckett

    It will load the first it finds - so if you move that, it would load the second. Probably best to move them both - or at least understand why they have been created and what customisation they are trying to achieve. Maybe you can look at the contents and compare with the standard file at <ICinstDir>/tools/dfII/etc/tools/menus/simui.menus

    Regards,

    Andrew.

Reply
  • Andrew Beckett

    It will load the first it finds - so if you move that, it would load the second. Probably best to move them both - or at least understand why they have been created and what customisation they are trying to achieve. Maybe you can look at the contents and compare with the standard file at <ICinstDir>/tools/dfII/etc/tools/menus/simui.menus

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.