Stats

  • Locked Locked
  • Replies 3
  • Subscribers 126
  • Views 5365
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to plot transistor's parameters evolution over time with transient simulation

Edouard R

Hello,


I am sorry if I wrote at the wrong place. (first time)

As a beginner on Cadence (student), I would like to know how to plot transistors parameters (Betaeff, Gm, Cgs, Cdg ...) over a transient simulation.

In fact, I would like to see the parameters values changing over time through a plot. To begin, I have only one transistor.


I've seen other topics, but they last from many years ago (4, 5 or even 8) and I don't understand what people did to plot parameters.

Can someone help me ?

Thanks :)

Parents
  • Edouard R
    I finally found the answer by assembling pieces here and there.
    1- Create a file name.scs everywere you want
    2- Write Inside : simulator lang=spectre
    save M0:gm
    save M0:cds
    save M1:Ron
    etc....
    Where M0, M1 are devices names and gm cds Ron are their proper parameters.
    3- import this file in ADE L > setup > Simulation Files > definition files
    4- In ADE L > Outputs > Setup : Add new expression correspunding to the parameter of the device taht you want to plot.
    ex: Name: gm
    Expression: pv("M1" "gm" ?result "tranOp")
    then add.
    5- Open result Browser, plot tran. :)

    And there you got your transistor's parameters evolving through transient simulation.
Reply
  • Edouard R
    I finally found the answer by assembling pieces here and there.
    1- Create a file name.scs everywere you want
    2- Write Inside : simulator lang=spectre
    save M0:gm
    save M0:cds
    save M1:Ron
    etc....
    Where M0, M1 are devices names and gm cds Ron are their proper parameters.
    3- import this file in ADE L > setup > Simulation Files > definition files
    4- In ADE L > Outputs > Setup : Add new expression correspunding to the parameter of the device taht you want to plot.
    ex: Name: gm
    Expression: pv("M1" "gm" ?result "tranOp")
    then add.
    5- Open result Browser, plot tran. :)

    And there you got your transistor's parameters evolving through transient simulation.
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.