• Skip to main content
  • Skip to search
  • Skip to footer
Cadence Home
  • This search text may be transcribed, used, stored, or accessed by our third-party service providers per our Cookie Policy and Privacy Policy.

  1. Community Forums
  2. Custom IC Design
  3. stitching results of two transient simulations

Stats

  • Locked Locked
  • Replies 3
  • Subscribers 125
  • Views 15087
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

stitching results of two transient simulations

SoniaMK
SoniaMK over 8 years ago

Hi,

This might be a simple question for those who are skilled in spectre but it seems I can't figure out how to do the following. I want to run two transient simulation, the second one starting from a point in time where the first simulation finished or perhaps at a point of time somewhere during the run of the first simulation. Then I would like to stitch together the results of the first and second simulation. I hope this is possible and going from the first to the second simulation can be done quite seamlessly.

Thanks for your help.

  • Cancel
Parents
  • SoniaMK
    SoniaMK over 8 years ago
    Thanks, Andrew, for the reply. Stitching the results was actually only half of my question. Equally important is how to run a second simulation from the time and state the first one stopped at and not having the second one start from time 0 and also not modifying anything in the testbench. Is it possible? Can you help with this?

    Thanks
    • Cancel
    • Vote Up 0 Vote Down
    • Cancel
Reply
  • SoniaMK
    SoniaMK over 8 years ago
    Thanks, Andrew, for the reply. Stitching the results was actually only half of my question. Equally important is how to run a second simulation from the time and state the first one stopped at and not having the second one start from time 0 and also not modifying anything in the testbench. Is it possible? Can you help with this?

    Thanks
    • Cancel
    • Vote Up 0 Vote Down
    • Cancel
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.

© 2025 Cadence Design Systems, Inc. All Rights Reserved.

  • Terms of Use
  • Privacy
  • Cookie Policy
  • US Trademarks
  • Do Not Sell or Share My Personal Information