Stats

  • Locked Locked
  • Replies 3
  • Subscribers 125
  • Views 1593
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to use save/restore feature with 1st run result

ichiro

Hi all,

I found a usage of "save and restore" in ADE as below.

https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1Od0000000nSpJEAU&pageName=ArticleContent

1st run: 0 - 10ms, saved at 10ms
2nd run: 10ms - 20ms using "***_at_10ms file"
Then the result included only 2nd run result.
Is it able to display/calculate a combined two run results as one waveform?

regards,

Ichiro

Parents
  • ShawnLogan

    Dear Ichiro,

    ichiro said:
    Is it able to display/calculate a combined two run results as one waveform?

    Did you happen to read the following On-line support article describing two ways to combine transient simulation runs?

    https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1Od0000000nVzkEAE&pageName=ArticleContent

    This second method might also be useful using the calculator to combine the results of a waveform from two simulation runs:

    https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1Od0000000nVaeEAE&pageName=ArticleContent

    Shawn

Reply
  • ShawnLogan

    Dear Ichiro,

    ichiro said:
    Is it able to display/calculate a combined two run results as one waveform?

    Did you happen to read the following On-line support article describing two ways to combine transient simulation runs?

    https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1Od0000000nVzkEAE&pageName=ArticleContent

    This second method might also be useful using the calculator to combine the results of a waveform from two simulation runs:

    https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1Od0000000nVaeEAE&pageName=ArticleContent

    Shawn

Children
  • ichiro
    in reply to ShawnLogan

    Dear Shawn,

    Thanks for great information! I'll try the way of combining two psf.

    Ichiro

  • ShawnLogan
    in reply to ichiro

    Dear ichiro,

    You are MOST welcome and good luck! I am just happy to read the information provided some thoughts to help you solve your problem!

    Shawn

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.