Stats

  • Locked Locked
  • Replies 2
  • Subscribers 125
  • Views 3007
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XL Compliance

LW202409248018

Hi,all

   I encountered an issue where the same layout displays different XL compliance results across different versions. In version IC6.1.7-64b.500.22, it shows 100%, while in version IC6.1.8-64b.500.13 , it only shows 88%. Additionally, areas that have already been connected are indicated as open circuit。The error message is as follows; however, the connection has already been established.The LVS and DRC processes have been successfully completed.

Open on net 'avdd' between:
- InstTerm of terminal 'S' of instance 'M62'
- InstTerm of unimplemented terminal 'B' of instance 'M62'

Parents

  • Hi,

    It is possible that we have some additional checks added.

    In the Option > Connectivity form go to Connectivity tab> Annotations > Incomplete Nets 

    Turn OFF Unimplemented instance pins.

    The open should disappear.

    Thanks,

    Alex

Reply

  • Hi,

    It is possible that we have some additional checks added.

    In the Option > Connectivity form go to Connectivity tab> Annotations > Incomplete Nets 

    Turn OFF Unimplemented instance pins.

    The open should disappear.

    Thanks,

    Alex

Children

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.