Issue: SKILL Script Creates Schematic and Symbol But Ports Are Missing

SKILL script to automatically generate a schematic and symbol for a 2nH inductor. The script executes without errors, but the ports are not appearing in the generated views (see attached image).


I'm using IC23.1. Could anyone help please


/////////////////////////////////////////////////////////////////////////////////////////////////////////////////

; Set library and cell names
lib = "XX"
cell = "inductor_2nH"


; Create schematic cellview
cv = dbOpenCellViewByType(lib cell "schematic" "schematic" "w")

; Add inductor instance from analogLib
inst = dbCreateInst(cv dbOpenCellViewByType("analogLib" "ind" "symbol" "" "r") "L1" 0.5:0.5 "R90")

; Set inductor value to 2nH
dbCreateProp(inst "l" "string" "2n")

; Create input port
schCreatePin(cv dbCreateNet(cv "in") "in" "inputOutput" nil 0.25:0.5 "R0")

; Create output port
schCreatePin(cv dbCreateNet(cv "out") "out" "inputOutput" nil 1.125:0.5 "R0")

; Connect ports to inductor
schCreateWire( cv "draw" "full" list(0.25:0.5 0.5:0.5) 0.3 0.3 0.0 )
schCreateWire( cv "draw" "full" list(0.875:0.5 1.125:0.5) 0.3 0.3 0.0 )

; Save and close schematic
schCheck(cv)
dbSave(cv)
dbClose(cv)

; Create symbol cellview
cvSym = dbOpenCellViewByType("XX" "inductor_2nH" "symbol" "schematicSymbol" "w")

; Draw symbol rectangle
dbCreateRect(cvSym list("device") list(0.0625:0.125 0.5:0.25))

; Add pins to symbol
schCreatePin(cvSym dbCreateNet(cvSym "in") "in" "inputOutput" nil 0.25:0.5 "R0")
schCreatePin(cvSym dbCreateNet(cvSym "out") "out" "inputOutput" nil 1.125:0.5 "R0")

; Save and close symbol
dbSave(cvSym)
dbClose(cvSym)

println("Inductor schematic and symbol created successfully in Hamada library!")

///////////////////////////////////////////////////////////////////////////////////////////////////