Stats

  • Locked Locked
  • Replies 1
  • Subscribers 91
  • Views 13048
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to set global clock signal routing in soc encounter?

Renee

Hi,

 Is there any way to route clock signal globally as did with Vdd! and GND! signals? Can I create a ring or stripe especially for clock signal and connect gates' clock signal to them?

 

Thanks in advance!

Renee

Parents

  •  Hi Renee,

    It kind of sounds like you want to do a clock mesh. I don't have any direct experience with clock meshes, but there is a section in the Encounter User Guide about this (appendix B for SOCE 7.1). Take a look and see if that meets your needs. 

    - Kari 

Reply

  •  Hi Renee,

    It kind of sounds like you want to do a clock mesh. I don't have any direct experience with clock meshes, but there is a section in the Encounter User Guide about this (appendix B for SOCE 7.1). Take a look and see if that meets your needs. 

    - Kari 

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.