Stats

  • Locked Locked
  • Replies 3
  • Subscribers 91
  • Views 13362
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DRC Errors and Shorts between power stripe and clock nets

Mooty

 Hi,

 

I have a lot of DRC Errors and Shorts between power stripe and clock nets.  Apparently, the routing of the clock nets simply ignores the power stripes as shown in the picture below:

[URL=http://img517.imageshack.us/my.php?image=shortingerrorsg8.png][IMG]img517.imageshack.us/.../URL]

How should I resolve this error?

Parents

  •  Hi Mooty,

     Is that a metal2 pwr stripe covering an m1 pin? If you are using vertical m2 for power, you are going to have a lot of pin access issues. This picture looks to me like the router had no choice to access the m1 pin, but to short with m2. What do you think?

     - Kari

Reply

  •  Hi Mooty,

     Is that a metal2 pwr stripe covering an m1 pin? If you are using vertical m2 for power, you are going to have a lot of pin access issues. This picture looks to me like the router had no choice to access the m1 pin, but to short with m2. What do you think?

     - Kari

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.