Stats

  • Locked Locked
  • Replies 2
  • Subscribers 90
  • Views 14105
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

eco routing

archive

I am trying to do eco route (nanoroute with ecoroute = true). I can only do changes in M2 and M3 and in the vias V12, V23.

I am able to limit nanoroute to only use M2 and M3 with ""setNanoRouteMode routeEcoOnlyInLayers 2:3"", but how do I allow it to use V12 without using M1?


Originally posted in cdnusers.org by ChrisS
Parents

  • Chris, in your flow, is nanoroute ripping up and re-routing
    all of the M2/M3, some (what it needs)of the M2/M3, or just adding to the current routing (new M2/M3 routing + existing M2/M3 routing).
    Do you need to ""fix"" the M2/M3 routing for the last choice? Can you do it this way?

    Any advice is appreciated...

    Thanks!


    Originally posted in cdnusers.org by KnightsWhoSayNi
Reply

  • Chris, in your flow, is nanoroute ripping up and re-routing
    all of the M2/M3, some (what it needs)of the M2/M3, or just adding to the current routing (new M2/M3 routing + existing M2/M3 routing).
    Do you need to ""fix"" the M2/M3 routing for the last choice? Can you do it this way?

    Any advice is appreciated...

    Thanks!


    Originally posted in cdnusers.org by KnightsWhoSayNi
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.