Stats

Locked Locked
Replies 3
Subscribers 91
Views 13876
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Flattened sdf file from hierarchical project

Hi,

I need to export both a hierarchical and a flattened verilog netlist from Encounter (8.1) with their corresponding sdf files. For the netlist, I use 'saveNetlist filename.v' and 'saveNetlist -flat filename_flat.v' commands but for the sdf, 'write_sdf' doesn't support the -flat parameter.

How do I get the sdf for the flattened netlist?

Thank you for the help!

Xtof

Parents

Xtof over 16 years ago

Hi Kari,

Thanks for your response.
I can certainly do that, but I would end up with a different layout, etc. I need the hierarchical and flattened netlists to be identical. Hence the problem...
-Christophe
Cancel
Vote Up 0 Vote Down

Cancel

Reply

Xtof over 16 years ago

Hi Kari,

Thanks for your response.
I can certainly do that, but I would end up with a different layout, etc. I need the hierarchical and flattened netlists to be identical. Hence the problem...
-Christophe
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.