Stats

  • Locked Locked
  • Replies 3
  • Subscribers 91
  • Views 3008
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

importing P/G pins into Encounter with .def file

archive

Dear all,
I have been trying to get the pins (VDD and VSS) in the extracted .def file from cadence into Encounter. however, when i do the defIn cmd, it keeps giving me this error:

Pin "VSS" is not created because it's not in the netlist and also not a P/G pin.

>> I know it's not declared in the Verilog netlist since it is power/ground pin. Why does Encounter not recognize it as a P/G pin. even in my .conf file, i have this:

set rda_input(ui_pwrnet) {VDD}
set rda_input(ui_gndnet) {VSS}

so if anyone has experience the same, please let me know. thank you very much.
regards,
chhay


Originally posted in cdnusers.org by kongtep2
Parents

  • mohanch007,
    thank you very much. you saved me! I haven't been trying to figure this out for a long time. it works when i specify the special net/pin in the .def file from cadence.

    I have another question regarding power planning tho. so i created a rectilinear contour for the core with the placement blockage using the partition cut. so when i addRing around the contour of the block, it says:

    selected placement blockage (x1, y1, x2, y2) will be considered by addRing command as placement objects.

    another thing is that the Encounter won't let me addRing using the type: core ring(s) contouring. it says the check design boundary or specify valid offsets.
    please help.
    thank you soooo much for your help!


    Originally posted in cdnusers.org by kongtep2
Reply

  • mohanch007,
    thank you very much. you saved me! I haven't been trying to figure this out for a long time. it works when i specify the special net/pin in the .def file from cadence.

    I have another question regarding power planning tho. so i created a rectilinear contour for the core with the placement blockage using the partition cut. so when i addRing around the contour of the block, it says:

    selected placement blockage (x1, y1, x2, y2) will be considered by addRing command as placement objects.

    another thing is that the Encounter won't let me addRing using the type: core ring(s) contouring. it says the check design boundary or specify valid offsets.
    please help.
    thank you soooo much for your help!


    Originally posted in cdnusers.org by kongtep2
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.