Stats

  • Locked Locked
  • Replies 3
  • Subscribers 91
  • Views 14290
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

crosstalk

Socencounter

 hi

 1.Can anybody please tell me the commands for cross talk?how to see the cross talk reports in soc encounter?

 2.how to read SDC at the later time i.e.,if i do some changes in.sdc file how to read that file?

 

Thanks in advance

Soc

Parents
  • Kari

     Check the text command reference for usage of timeDesign -si.

    As for SDC changes, it depends what you're doing and where you are in the flow. If you're doing MMMC, you can use update_constraint_mode. If you're just running one corner, you can do unloadTimingCon followed by loadTimingCon my.sdc.

    Hope that helps!

Reply
  • Kari

     Check the text command reference for usage of timeDesign -si.

    As for SDC changes, it depends what you're doing and where you are in the flow. If you're doing MMMC, you can use update_constraint_mode. If you're just running one corner, you can do unloadTimingCon followed by loadTimingCon my.sdc.

    Hope that helps!

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.