Stats

  • Locked Locked
  • Replies 9
  • Subscribers 92
  • Views 19806
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PVS-LVS

archive

Hi All

Im new to run pvs-lvs can i know how to run lvs and what are the input files required for it and how i have to check the results.

Im getting some warnings while running it

I used the following input files

postrouted netlist,cdl files,gds (merged all std cell and rams gds files),hcell.txt(contains all head cell names two times)

 

Parents

  • Hi Kari,

    Im ruuning by command line only

    pvs -64 -lvs -gds clu.gds.gz -ascrdb clu.db -top_cell clu -spice clu.spi -verilog clu_lvs_new.vg -hcell hcell.txt -source_cdl sub.cdl -layout_top_cell clu -source_top_cell clu -sum clu.sum DFM_LVS_CAL_N65_ALRDL_noU_13b.7m | & teelog_file

    this is the command im using , im seeing in .cls file for mismatches i found all filler cells as mismatched in layout.but i opend the .gds file in virtuso there im seeing filler cells what might be the reason for mismatch of fillers?

    what is the best way to analyse and debug the lvs reports?

Reply

  • Hi Kari,

    Im ruuning by command line only

    pvs -64 -lvs -gds clu.gds.gz -ascrdb clu.db -top_cell clu -spice clu.spi -verilog clu_lvs_new.vg -hcell hcell.txt -source_cdl sub.cdl -layout_top_cell clu -source_top_cell clu -sum clu.sum DFM_LVS_CAL_N65_ALRDL_noU_13b.7m | & teelog_file

    this is the command im using , im seeing in .cls file for mismatches i found all filler cells as mismatched in layout.but i opend the .gds file in virtuso there im seeing filler cells what might be the reason for mismatch of fillers?

    what is the best way to analyse and debug the lvs reports?

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.