i am working with soc -encounter. while routing the design no violations were reported.but when verified with calibre -lvs its showing 4 incomplete nets. when checked for same nets in soc - E those are no connected/routed as required.what would be the reason & how to overcome such violations.
should these nets must be routed manually?
Thanks for your suggestions, finaly found out the reason behind the problem.
The netlist provided was not made case-sensitive. In design which were reported as incomplete nets are all case senstive.
This we can found out by checking in Tools --> schematic viewer of SoC-E.
When i tried it showed 2 nets of same name with case sensitivity like N97 & n97. By making the netlist case sensitive the problem is solved.