Stats

Locked Locked
Replies 3
Subscribers 92
Views 4273
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Inputs without external driver/transition

Kabal over 11 years ago

Here is how I defined constraints for example for my inputs:

# set input ports transition slew rates

set_input_transition -rise -min 0.5 /designs/refleks_switcher/ports_in/pwm_in_port1*

set_input_transition -fall -min 0.5 /designs/refleks_switcher/ports_in/pwm_in_port1*

# set external driver input slew (in picoseconds)

set_attribute external_driver_input_slew {100 100} /designs/refleks_switcher/ports_in/pwm_in_port1*

However, when I run:

report timing -lint

it still shows the same amount of ports with "inputs without external driver/transistion" warning,

why is RTL Compiler not happy with the constraints I defined? I did define the transition

Parents

Kari over 11 years ago

check into set_driving_cell. that is what i usually see used.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

Kari over 11 years ago

check into set_driving_cell. that is what i usually see used.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.