CPU & Memory Usage details in ncverilog log file.

Hi,

I'm trying to do profiling on specman e code using nc-verilog simulatior 8.2 and IUS specman 8.2.

The specman profiling is done for a small block and to a core block.The goal  is also  to know the details of CPU and Memory Usage which is seen at the end of the log file.

For block I could see this information as shown below

----------------------------------------------

<<< End of Test >>>

nc_specman is doing end-of-test operations Checking the test ...

Checking is complete - 0 DUT errors, 0 DUT warnings.

Post-processing profiling data ...

..samples_counter 1927

Creating the report ...

Done.  Report saved in sn_prof.16244/report_mem.html End-of-test operations are completed

Memory Usage - 16.5M program + 245.7M data = 262.2M total

CPU Usage - 4.0s system + 362.2s user = 366.2s total (95.5% cpu)

Simulation complete via $finish(2) at time 58837852 PS + 0

( This was not run with Intelligen )

When I tried the same for core block, I couldn't see the details of the CPU and Memory Usage but the profiler report is generated as shown below

------------------------------------------------------

<<< End of Test >>>

nc_specman is doing end-of-test operations Checking the test ...

Checking is complete - 0 DUT errors, 0 DUT warnings.

Post-processing profiling data ...

...samples_counter 2529

Creating the report ...

Done.  Report saved in sn_prof.29016/report_mem.html End-of-test operations are completed Simulation complete via $finish(1) at time 45770913568 FS + 0

(This was run with Intelligen )

----------------------------------------------------------------

What could be reason for those Usage details not being printed in the second log file?

What factors determines to display the Usage details in the log file?

-DB