Stats

  • Locked Locked
  • Replies 6
  • Subscribers 62
  • Views 17111
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with un-mapped elements

archive

Hi,
I am trying to run Conformal on RTL vs gate-level netlist. I have noticed that synthesis removed a FF in netlist due to that fact that its D input has been tied to 0. Howver while flattening the netlist the FF is not removed and is reported as unmapped element. As a result some comapre points fail due to the fact that this FF is in the logic cone.
By looking at schematic of golden netlist and tracing back the D input of the FF it looks like this pin is connected to other elementes named DC which shows as connection due to constraint. How can I identify which is the offendign constraitn that originated the problem. report_pin_constraint and report_dynamic_constraint command do no report any constraint.

Thanks
Maurizio Spadari  
Principal Design Engineer
NemeriX SA


Originally posted in cdnusers.org by maurizios
Parents Reply Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.