Cadence® system design and verification solutions, integrated under our System Development Suite, provide the simulation, acceleration, emulation, and management capabilities.
System Development Suite Related Products A-Z
Cadence® digital design and signoff solutions provide a fast path to design closure and better predictability, helping you meet your power, performance, and area (PPA) targets.
Full-Flow Digital Solution Related Products A-Z
Cadence® custom, analog, and RF design solutions can help you save time by automating many routine tasks, from block-level and mixed-signal simulation to routing and library characterization.
Overview Related Products A-Z
Driving efficiency and accuracy in advanced packaging, system planning, and multi-fabric interoperability, Cadence® package implementation products deliver the automation and accuracy.
Cadence® PCB design solutions enable shorter, more predictable design cycles with greater integration of component design and system-level simulation for a constraint-driven flow.
An open IP platform for you to customize your app-driven SoC design.
Comprehensive solutions and methodologies.
Helping you meet your broader business goals.
A global customer support infrastructure with around-the-clock help.
24/7 Support - Cadence Online Support
Locate the latest software updates, service request, technical documentation, solutions and more in your personalized environment.
Cadence offers various software services for download. This page describes our offerings, including the Allegro FREE Physical Viewer.
Get the most out of your investment in Cadence technologies through a wide range of training offerings.
This course combines our Allegro PCB Editor Basic Techniques, followed by Allegro PCB Editor Intermediate Techniques.
Virtuoso Analog Design Environment Verifier 16.7
Learn learn to perform requirements-driven analog verification using the Virtuoso ADE Verifier tool.
Exchange ideas, news, technical information, and best practices.
The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information.
It's not all about the technlogy. Here we exchange ideas on the Cadence Academic Network and other subjects of general interest.
Cadence is a leading provider of system design tools, software, IP, and services.
Is there anyway that i can design a digital circuit in Virtuoso Schematic window...
And include the *.v file in the schematic capture window..
Yes. You can create textual Verilog views (File->New->CellView and set the Type to "Verilog" - give the lib/cell/view a name). Then in the resulting editor create the Verilog representation. When you save and exit the editor, it will syntax check the view and then prompt you to create a symbol. You can instantiate this in the schematic.
I'm trying to build a voltage controlled curent source,I opened a new file with a verilogAMS text and write the following:
VCCS(p,n,pc,nc);inout p,n;input pc,nc;electrical p,n,pc,nc;parameter real
gain=1;branch (p,n) iSrc;analog beginI(iSrc) <+
and I created a symbol for it then I instantiate it on the schematic page but the output is always zero?
Can any one help me?
In reply to Andrew Beckett:
Thanks.. so i have to write a .v file and create a symbol.. am i right...
What is the difference between this and the synthesis tool
In reply to Sali:
VCCS(p,n,pc,nc);inout p,n;electrical p,n,pc,nc;parameter real
gain=1;branch (p,n) iSrc;analog beginI(iSrc) <+
Not sure why you posted this on the end of another thread, but the code you posted has typos in it - it wouldn't even syntax compile. I used a command-line example to try this out (having fixed the typos):
`include "disciplines.vams"module VCCS(p,n,pc,nc);inout p,n;input pc,nc;electrical p,n,pc,nc;parameter real gain=1;branch (p,n) iSrc;analog beginI(iSrc) <+gain*V(pc,nc);endendmodulemodule test;electrical gnda;ground gnda;vsource #(.freq(1M),.ampl(0.5), .type("sine")) V1(n1,gnda);resistor #(.r(1k)) R1(op1,gnda);VCCS #(.gain(1m)) I1(op1,gnda,n1,gnda);endmodule
And this together with testVCCS.scs :
tran tran stop=2u
I then ran "irun -gui testVCCS.scs testVCCS.vams" and I see these results (having problems uploading the picture, so I'll try again in a moment). Looks pretty OK to me.
In reply to kenambo:
kenambo Thanks.. so i have to write a .v file and create a symbol.. am i right...What is the difference between this and the synthesis tool
A synthesis tool takes RTL (Register Transfer Level) code and converts it into a gate level representation. Writing a Verilog text view and simulating that just means that you're simulating what you wrote without it being synthesized. So it's a bit like asking what is the difference between an orange and a car - two completely different things.